Wingmen do not respond
-
With the informations you give, there is almost nothing else we can say, apart that you’re doing something wrong.
I normally chose to take off from the runway, which preset should I choose to get clearance?
-
I don’t know, I never use it. Devs recommend not to use runway.
-
Tacannav, you need to take a look at the Comm plan in the Briefing prior to launch. There you will find the frequencies associated with the presets. Also, a good read of the Comms/Nav Manual is in order… More practice I sense for you. Take care and clear skies!!
-
I normally chose to take off from the runway, which preset should I choose to get clearance?
Ask departure to Tower Frequency
A good Read of the nav/comm manual seem necessary
-
Tacannav, you need to take a look at the Comm plan in the Briefing prior to launch. There you will find the frequencies associated with the presets. Also, a good read of the Comms/Nav Manual is in order… More practice I sense for you. Take care and clear skies!!
I look at all the comm info,. It’s not that difficult, But when I am told by atc to contact clearance at frequency 6240900, what am I supposed to do with a frequency like that? Radio doesn’t even accept it.
-
I am told by atc to contact clearance at frequency 6240900, what am I supposed to do …
!!! … Uninstall then reinstall your soft and / or remove mods! (?!?!)
Radio doesn’t even accept it.
Normal => https://en.wikipedia.org/wiki/Airband “UHF-AM band from 225.0–399.95 MHz for air-to-air and air-to-ground”
-
I finally got it!!!...after 10,000 years and one day, I knew I could do it, I got this whole thing solved, dont take off from the runway…now things are working fine, thanks guys for the helpful input.
-
Awesome!!! May a plethora of unarmed Migs head your way!!
-
I finally got it!!!...after 10,000 years and one day, I knew I could do it, I got this whole thing solved, dont take off from the runway…now things are working fine, thanks guys for the helpful input.
There is nothing wrong whatsoever with starting on the runway - I do it loads and loads of times for test purposes.
-
I resolved this issue by no longer starting from the runway.
-
I just use vhf on com 2. Check the communication manual and you will see how to get it setup. I just mapped com 1 and 2 on my throttle so I will try this along with voice attack soon!