YAME64 suite
-
Moving map is working ok in both Korea and Balkans theater. My question is about RWR and DED not working in F-18E(F-18C is ok).
Have a look into this thread. Yame gauges and position reading is discussed and described there
https://www.benchmarksims.org/forum/showthread.php?35552-BMS-4-34-F-A-18-missing-needles-in-all-analog-gaugesGesendet von meinem SM-G930F mit Tapatalk
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:
-Only Korea KTO map seems to work, and it somehow stays on even with other theaters.
-No data from WDP imported in CPD, I tried the options in the GUI
-The Nightvis mode works fine
-the ‘mode’ tab on the attitude page not function
-the zoom out tab on the attitude page not functional
-callback programming no problems hereI might have made mistakes on the workaround routine, have to recheck
Other than that I have been using Y64 almost everyday the last 2 months, love it:)
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:
-Only Korea KTO map seems to work, and it somehow stays on even with other theaters.
-No data from WDP imported in CPD, I tried the options in the GUI
-The Nightvis mode works fine
-the ‘mode’ tab on the attitude page not function
-the zoom out tab on the attitude page not functional
-callback programming no problems hereI might have made mistakes on the workaround routine, have to recheck
Other than that I have been using Y64 almost everyday the last 2 months, love it:)
For the map issue, a work around for me was changing the registry key on both falcon version. Check my previous post
Sent from my SM-G960U using Tapatalk
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
If you are using a different theater, that key should already contain the name of the theater in use(?)
-
If you are using a different theater, that key should already contain the name of the theater in use(?)
Only in the current version. Not in the old one that you need to maintain to keep yame working
Sent from my SM-G960U using Tapatalk
-
sorry if been asked again, but is there an ETA for the updated version of YAME?
we love this tool:bowd: -
sorry if been asked again, but is there an ETA for the updated version of YAME?
we love this tool:bowd:I’m afraid not.
Roccio is currently occupied with more urgent private matters until further notice. -
Let’s hope things get better for him, we wait patiently for the big day
-
Let’s hope things get better for him, we wait patiently for the big day
Thank you very much. Hope to get some free time soon.
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
I did it for EMF. Map appears now correctly but position is not updated. Maybe is due to EMF theater not exisiting in Falcon 4.33 instalation? Coordinates seems to be wrong. Route is missing also.
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:…
-No data from WDP imported in CPD, I tried the options in the GUI
So my combo is W10 BMS4.34U2 YAME1.2.1 and I am checking out the CPD mostly for the moving map.
It works somewhat. I get my position and the bulleseye but I am not seeing the steerpoints on the map. In the upper left of the display the steerpoints are accurate as to distance and bearing but they do not include Action, TOS, IAS, or Alt?
-
Hi guys, I have BMS 4.34U2 and have just downloaded YAME64. It doesn’t work whatsoever and I guess it’s because I haven’t got 4.33 installed. Basically when i start YAME64 and try to launch client it says "you have g_bExpoRTTTextures set to 0 in falcon bms.cfg , so NO extraction will be possible. I checked the bms.cfg file and it is set to 1. Would I solve this problem by installing 4.33 and following the HOW TO guide from the YAME website? or is there a different problem?
-
Just follow the workaround with installing 4.33 I have Yame64 running with since 4.34 as well with U1/U2 running
-
ok, so I’ll install 4.33. It won’t mess up anything in 4.34, will it?
-
You install it into a seperate Folder
I.e
C:/Falcon BMS 4.34 and C:/Falcon BMS 4.33
It won’t mess up anything. 2 instances that don’t have anything in commonOn my side I even haven’t done the registry entry and it works.
Only thing to mention whenever you restart BMS and have the Yame Cient still running you have to stop and start the Yame Client as well. That doesn’t mean to close Yame completely just stop and start with the button in the Yame UI
Gesendet von meinem SM-G930F mit Tapatalk
-
AWESOME! Got it working! I had to do a full uninstall (including deleting the folder it was installed in previously) to make it work again. Now it’s time to setup the 2nd screen with all the gauges. Guess that will take a while! thanks for your help
-
Does anybody know where to get the panel “load layout” that is displayed on the YAME64 website screenshot page? the panel im asking about is the last one of the screenshots titled “BAF MLU with ATD & EHSI in action”? This is the link: https://www.yame64.com/wp-content/gallery/user-interface/yame_20170105.png
-
Does anybody know where to get the panel “load layout” that is displayed on the YAME64 website screenshot page? the panel im asking about is the last one of the screenshots titled “BAF MLU with ATD & EHSI in action”? This is the link: https://www.yame64.com/wp-content/gallery/user-interface/yame_20170105.png
I don’t understand your question.
Load layout is a button to load premade layouts. The layout you mention, is one I made, and is present in the install.Manual page 77:
You can also load a layout file or save the one with a different name (for backup in example). This way you can create several layouts and load the one you want for this Falcon BMS session. You can even share your preferred layouts with friends.
By default YAME will try to load the default.xml. If that file is not present, you will get a popup saying you need to select a layout file.
Layout files are stored in XML format in your YAME subfolder “layouts”.Just select the _mlu-baf crpatd-ehsi.xml
-
Hi Focaldesign and thanks for the quick reply. When I select the mlu-baf_crpatd-ehsi.xml file and then start client I can see all the instruments/gauges and they all work but what I don’t have is the background panel. All I have is the gauges on a black background. So for example, next to the HSI there is no fuel qty sel panel, just a black background. How do I get the full panel?
-
Hi Focaldesign and thanks for the quick reply. When I select the mlu-baf_crpatd-ehsi.xml file and then start client I can see all the instruments/gauges and they all work but what I don’t have is the background panel. All I have is the gauges on a black background. So for example, next to the HSI there is no fuel qty sel panel, just a black background. How do I get the full panel?
https://www.dropbox.com/s/p7l3x2oxmc0yy2a/mlu-baf%20_crpatd-ehsi_bg.xml?dl=0 try this file. Drop it in the yame64/layouts folder.
https://www.dropbox.com/s/8d3e700s786w5vq/ATD-bg_20170205-2.png?dl=0 drop this background image in the yame64/images folder.
You might need to alter the layout xml file a bit depending on where you have yame installed. In the first part (the first <window>element of the <windows>section), you’ll see the parameter and the path to the file. Mine is at c:\program files\yame64\images, but yours might be somewhere else, depending on where you installed Yame. Change it where necessary. Use notepad, not word or text editor that adds metadata etc to the file.</windows></window>