YAME64 suite
-
Hi all
After a few months without running YAME64, today I resumed the extraction (with no changes, I have the same monitor, the same configuration, I keep BMS 4.33 in the computer…etc. The only change I made is an update from 4.34 to 4.34.1 and then to 4.34.2) but I have a problem
My problem is that I cant get the 2 MFD in the screen.All the instruments are extracted OK in the second monitor but no MFD ¿¿??
I got a message from YAME64: “…RTT is set to 0 so no extraction, please change to 1 in falcon BMS config…” or something like that,but that’s not true, I have RTT set to 1 in both configs (4.33 + 4.34)
I have two Thrustmaster MFD button bezels attached with velcro to the second monitor, this is the main reason for running YAME64, but now that part of the screen is blank!
Any idea?
best regards
-
Do you have the 3Dhook option still active in YAME ?
and have you removed the Hook Files ? (in YAME >>“Globals”) ?See here as well
https://www.yame64.com/how-to/ -
Problem solved!
For some reason, the name of my BMS 4.33 folder in was not the same that the one in YAME64.xml
I changed it and that made the trick! So now I’m enjoying YAME64 again
Everybody having the same issue please make sure that BOTH paths are exactly the same, for example in my computer:
C:\Falcon BMS 4.33
C:\YAME64\config\YAME64.xml <path>C:\Falcon BMS 4.33</path>Best regards
-
Hi,
YAME works very well for me in BMS 4.34U2. I can use CPD, DED and RWR for both F-16 and F-18C.
But DED and RWR doesn´t work for F-18E, CPD does.
Is this normal?Thank you.
-
Not on my PC at the moment so can’t check. But if the in pit position of DED and RWR is different than yes that’s normal. I’m currently elaborating how Yame reads from SharedMem so might give an more technical answer in the near future
Gesendet von meinem SM-G930F mit Tapatalk
-
Not on my PC at the moment so can’t check. But if the in pit position of DED and RWR is different than yes that’s normal. I’m currently elaborating how Yame reads from SharedMem so might give an more technical answer in the near future
Gesendet von meinem SM-G930F mit Tapatalk
Ok,thank you.
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
Moving map is working ok in both Korea and Balkans theater. My question is about RWR and DED not working in F-18E(F-18C is ok).
-
Moving map is working ok in both Korea and Balkans theater. My question is about RWR and DED not working in F-18E(F-18C is ok).
Have a look into this thread. Yame gauges and position reading is discussed and described there
https://www.benchmarksims.org/forum/showthread.php?35552-BMS-4-34-F-A-18-missing-needles-in-all-analog-gaugesGesendet von meinem SM-G930F mit Tapatalk
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:
-Only Korea KTO map seems to work, and it somehow stays on even with other theaters.
-No data from WDP imported in CPD, I tried the options in the GUI
-The Nightvis mode works fine
-the ‘mode’ tab on the attitude page not function
-the zoom out tab on the attitude page not functional
-callback programming no problems hereI might have made mistakes on the workaround routine, have to recheck
Other than that I have been using Y64 almost everyday the last 2 months, love it:)
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:
-Only Korea KTO map seems to work, and it somehow stays on even with other theaters.
-No data from WDP imported in CPD, I tried the options in the GUI
-The Nightvis mode works fine
-the ‘mode’ tab on the attitude page not function
-the zoom out tab on the attitude page not functional
-callback programming no problems hereI might have made mistakes on the workaround routine, have to recheck
Other than that I have been using Y64 almost everyday the last 2 months, love it:)
For the map issue, a work around for me was changing the registry key on both falcon version. Check my previous post
Sent from my SM-G960U using Tapatalk
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
If you are using a different theater, that key should already contain the name of the theater in use(?)
-
If you are using a different theater, that key should already contain the name of the theater in use(?)
Only in the current version. Not in the old one that you need to maintain to keep yame working
Sent from my SM-G960U using Tapatalk
-
sorry if been asked again, but is there an ETA for the updated version of YAME?
we love this tool:bowd: -
sorry if been asked again, but is there an ETA for the updated version of YAME?
we love this tool:bowd:I’m afraid not.
Roccio is currently occupied with more urgent private matters until further notice. -
Let’s hope things get better for him, we wait patiently for the big day
-
Let’s hope things get better for him, we wait patiently for the big day
Thank you very much. Hope to get some free time soon.
-
If you are using another theater and you are using the CPD moving map, you also need to change HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.33 U1\curTheater to reflect the new theater.
I did it for EMF. Map appears now correctly but position is not updated. Maybe is due to EMF theater not exisiting in Falcon 4.33 instalation? Coordinates seems to be wrong. Route is missing also.
-
First I have to express my appreciation for all the work Roccio does, it is amazing.
With 4.34U2 running smoothly on W10 (btwI use Y64 only for CPD) this is my experience:…
-No data from WDP imported in CPD, I tried the options in the GUI
So my combo is W10 BMS4.34U2 YAME1.2.1 and I am checking out the CPD mostly for the moving map.
It works somewhat. I get my position and the bulleseye but I am not seeing the steerpoints on the map. In the upper left of the display the steerpoints are accurate as to distance and bearing but they do not include Action, TOS, IAS, or Alt?
-
Hi guys, I have BMS 4.34U2 and have just downloaded YAME64. It doesn’t work whatsoever and I guess it’s because I haven’t got 4.33 installed. Basically when i start YAME64 and try to launch client it says "you have g_bExpoRTTTextures set to 0 in falcon bms.cfg , so NO extraction will be possible. I checked the bms.cfg file and it is set to 1. Would I solve this problem by installing 4.33 and following the HOW TO guide from the YAME website? or is there a different problem?