Has anyone bought and tested the TM TQS?
-
@cougar56th
yeah noticed it right now Laser ARM and OFF dont be recogniozed always the dx48 -
In my limited experience the AL always recognises the DXnumber - just not possible to assign them all.
I’m sure the “DXxx release” suggestion is probably really easy - but sorry, I’m not sure exactly how you go about doing this?
So for example. Let’s take the master arm example.
In the AL key mapping section I find the entry for master arm on - select the box for my TQS - double click and it flashes “awaiting input” so I click the switch on panel up, it recognises my key press and assigns it correctly.
I can do exactly the same for the switch location in the down position and assign “sim”
How do I assign the “off” position?
Regards,
Gary
-
Take a look for Master
Set the Master switch to OFF then double click the OFF postiton and then change the Press to
Release and switch the switch to all Up and all Down postionwith this “trick” thx to @Skorp and @cougar56th i now have set every switch
-
Thank you. Got it I think. And thanks to all who have helped in this thread!
What do you map PRGM “bit” to? (I have 1,2,3,4 mapped ok)
Regards,
Gary
-
Hehe i know this will come up, i just left it empty i checking the manual but i think its not implemented
And don’t be supriesed the switch from “Pitch ALT HOLD / A/P / ATT HOLD” is not movin in 3D, at least when i tested it in the GroundOPs TE
Edit: didnt find any info in the 34 about the BIT at the CMDS
-
One thing to keep in mind is that the new TM TQS also uses “virtual buttons” in addition to physical switch positions. Looking over the manual, is appears that virtual buttons must be enabled/assigned to get three position selections to work as expected. Double check.
-
thats correct, but the Alternativ Launcher sometime doesn’t recognizes when your are moving the switch from “real” dx to a “virtual” dx postion , so it was with me / my TQS
-
Thanks and yes “virtual buttons enabled” - just don’t work as expected. That ios to say the virtual buttons are recognised in the AL but you are not able to assign them! - hence the “release” workaround. Which does works as some very helpful others have outlined above. Mine all set now too thanks all.
regards,
Gary
-
All sorted now thank you.
My pitch ALT hold etc etc all functioning and showing as such in 3D.
I’ve been using the Nav TE for my testing and setting up but doubt that makes any differance!
Thanks for all your help.
Regards,
Gary
-
We should write a summary about the dx issue and pin it with the workaround
-
Lol - you give me too much credit in my ability to do what you suggest on the forum. If I could I would, so definately a really good suggestion to save others the hassle!
Took me the best part of the day to get my head around using the “release” mapping trick!
In my defence, I’m getting on in life!Regards,
Gary
-
wrote a summery can someone tell me if its understandable
-
Looks good.
Just two observations from me.
First line possibly should say “no time” rather than "now time.
Also might be worth clarifying that virtual buttons ARE recognised - just not assignable?
Regards,
Gary
-
@Echo - I had that problem once with the stock Launcher/Setup and trying to set Trigger Detent 1 and 2. I solved it by making one selection first and then moving the Trigger into the position I wished to set and then making the assignment. Might want to try that - I had to try this several times to get it to work.
-
@Echo jejeje, sorry but I don’t have new tqs . I have sismo cards, but I suppossed the base is the same
-
So, do we have an early verdict on the product?
-
@huffer2
The cable has USB-A and C ends.
C type goes to the TQS, not to the PC. -
@Echo said in Has anyone bought and tested the TM TQS?:
And don’t be supriesed the switch from “Pitch ALT HOLD / A/P / ATT HOLD” is not movin in 3D, at least when i tested it in the GroundOPs TE
May F-16 avionics does not allow AP settings on the ground because of safety reasons You don’t really want to try to take off with AP working
-
@huffer2
Viper TQS is connected and functional.
But I can’t find that in T.A.R.G.E.T to program some script。
Is there anyone who was successful at the TARGET script with Viper TQS.
-
We have to wait ( 3 or 4 weeks ? ) a new version of TARGET.
A bad joke from TH : they release a beautiful car without any steering wheel.
And we are enought stupid to buy it.