MFD Extractor not working
-
Hi all,
Since I have been rewiring and updating my pit, I missed the 4.35 release. So I started with 4.35 and I’m unable to make my MFD’s working (extracting via MFDE).
Any suggestions?Kind regards,
PopTops
-
You installed U1? If not you must install it.
-
Yep I did
-
Also - make sure you’ve pointed MFDE at the new installation location…I tend to forget that sometimes myself.
-
Hi all,
Since I have been rewiring and updating my pit, I missed the 4.35 release. So I started with 4.35 and I’m unable to make my MFD’s working (extracting via MFDE).
Any suggestions?Kind regards,
PopTops
If you are using the MFDExtractor 0.6.3.0 make sure in your falcon bms.cfg following 2 lines are set
to enable Extraction at all in BMSset g_bExportRTTTextures 1
Even so not used in 4.35 but MFDE requires the parameter to be present
set g_bDoubleRTTResolution 1
Version of MFDE build from the latest source code don’t need the above setting to be made by the user as MFDE would take care, but the version you can downöload from github is not build from the latest source code
-
gonna try that one! Thanks!
-
If you are using the MFDExtractor 0.6.3.0 make sure in your falcon bms.cfg following 2 lines are set
to enable Extraction at all in BMSEven so not used in 4.35 but MFDE requires the parameter to be present
Version of MFDE build from the latest source code don’t need the above setting to be made by the user as MFDE would take care, but the version you can downöload from github is not build from the latest source code
Hi!
Where to download this version of MFDE built from the latest source code?
Thanks !!! -
Hi!
Where to download this version of MFDE built from the latest source code?
Thanks !!!https://drive.google.com/file/d/177VhX_kTKOSL9vjobD7fzHGk2GupigrP/view?usp=sharing
It’s a portable version so doen’t come with an installer. Just unzip and run the MFDExtractor.exe. Even no need to deinstall other MFDE version that are already installed
Just make sure that Performance tab is set correctly -
Thanks,oakdesign !!
Stay safe!! -
Perfectly working!
Thx -
Thanks:p
-
Hi OakDesign,
Does the newer version of MFDE as posted above have as an option the extraction of the analogue clock ?
Ironman
-
Hi OakDesign,
Does the newer version of MFDE as posted above have as an option the extraction of the analogue clock ?
Ironman
Nope neither the original dev nor myself had time to implement an analoge clock yet
-
“yet” sounds promising ;0)
-
thank you ! the portable version works fine …but only one thing doesn’t work
I use an external USB display and I need to relocate each extraction on my external USB display once time I start my computer
is there a way to fix that? I 'd like save the position of each extraction as it was possible to do with the installed version…
now each time I switch on the computer and the USB display, MFDE displays all extractions on my main screen … -
@suhkoi69 Did you manage to get a counter measure to MFDE reseting the position of your extracted instruments to the main screen. I have the same issue and even if I modify the ‘MFDExtractor.exe.config’ manually to set the appropriate coordinates of the extracted instrum, MFDExtractor does not seem to read it…
I really don’t know where the location (X,Y) of the extracted instruments are recorded. -
@capt_oliv locations and which siplay is stored in
C:\Users\yourusername\AppData\Local\MFDExtractor\MFDExtractor.exe_Url_xxxxxxxxxxxxxxxxxxxx\0.6.3.0\user.config -
@oakdesign Thank you !
Manual tuning of flight instruments location/size/… for additional monitors is working great when performed in
C:\Users\yourusername\AppData\Local\MFDExtractor\MFDExtractor.exe_Url_xxxxxxxxxxxxxxxxxxxx\0.6.3.0\user.config
as stated here above. -
-
-
-
-
-
the MFDE extractor works on Windows 11, It will not start up on a fresh windows 7 install. Do I need extra software??
-
-
Going from 4.36 to 4.37 has been a challenge, but worth it!
Using the latest MFDE extraction has been a dance. Can’t get out of having the HUD show up in both MFDs. Suggestions please. / Getsno…