@Maverick996 Can you show a picture of your Version like i did… ?
Posts made by Echo
-
RE: Thrustmaster viper tqs cutoff setting
-
RE: Thrustmaster viper tqs cutoff setting
@Maverick996 hi by chance did you have installed the TH driver ? So you can check if you got the everything set ?
-
RE: Multi Player (IPv6)
what you could also do is to edit the PhoneBKn.ini which can be found at …\Falcon BMS 4.37\User\Config
There you can easy add the IPv6 Adress to be sure you didn’t lose any nummber
-
RE: Wingman coms blocking the VHF
Thanks for your quick resopne!
then this issue is solved i would say -
RE: Wingman coms blocking the VHF
hi @Mav-jp @CriticalMass @GhostDog-0
Thank you for your quick respone!
Maybe I misinterpreted my issue and mixed it up so appologies for this
But what you can see on the tape is that if you have another channel like 13 (which is absolutly incorrect) and not the correct 15
My question maybe should be why is the AI still getting the Commands and reacting to it ? and why I’m transmiting the hole time until i get back to the right channel
Thank you for your Input
-
Wingman coms blocking the VHF
Hi,
per accident i found a issueVersion and Build number:
4.37.3 (x64) 1358Detailed Description
Wingman coms blocking the VHFPictures/Video:
Crash logs*:
no crash
Dump Files (*.dmp):
no dumpReproducibility Procedure
- In the air, waiting that 2 is rejoined VHF 15
- flying to Tanker, changing to Tanker VHF 13
- Sending Wingman back to Base while on VHF 13
- VHF 13 is lit up without any comms hearing and is “transmitting” the hole time
- Wingman reacts to “rejoin” command but the VHF Channel is still on transmitting
- Changing VHF back to 15 Wingman confirms commands and VHF stops beeing blocked
Expected Behavior
Wingman dont react on the command while on VHF 13 ? and dont block the VHF ?Files: Modified TE AAR Mission (start time change so a rampstart is possible)
TE AAR MissionIf this is just working as designed then sorry for bothering
-
RE: BMS2Target: BMS to Thrustmaster HOTAS LED Controller (Viper Mission Pack and Viper Panel)
Sorry for my late respone worklife had overhand.
And its working like expacted.
So no worries !
Thank you for Tool !
-
RE: BMS2Target: BMS to Thrustmaster HOTAS LED Controller (Viper Mission Pack and Viper Panel)
well I m still on windows 10 so i dont really can give u a advise
but try to exclude the both software form mcafee
should the Gearhandl also be lit when the 3 greens are lit ?
-
RE: BMS2Target: BMS to Thrustmaster HOTAS LED Controller (Viper Mission Pack and Viper Panel)
@Scotters
do you have a antivirus software acktiv ? Which Windows Version do you got ? -
RE: BMS2Target: BMS to Thrustmaster HOTAS LED Controller (Viper Mission Pack and Viper Panel)
if you using the TE as you mentioned then it wont gonna work because this is the F-16 with double seats and this isn’t supported i mean the type which is used in the TE
Start a campanie or maybe a dogfight
-
RE: BMS2Target: BMS to Thrustmaster HOTAS LED Controller (Viper Mission Pack and Viper Panel)
Are you testing with a TE ? If so the F-16 Type might not match, at the moment only the following Typs are supported:
F-16 CM Blk 40
F-16 CM Blk 50
F-16 CM Blk 52
F-16 DM Blk 52and what you can do to be sure is that you start the App with Admin rights.
For the location, i have just copied it on the Desktop.
And its normal that after exiting BMS the App (BMS2Target) shuts down
-
RE: Hotstarts With Viper TQS
Great testing i could add this info to the “Quickstart guide”
-
RE: Anyone having issues with VIPER TQS C-usb connector
Hi, my USB Connectore and Cable which isnt the best processed cable in the world are working even when i move from the “parking” postion to the “gaming” postion left corner from table to the middle but im also very cautious beacue the USB C connector isnt 100% in the TQS, so im thinking to order a diffrent cable to have one as back up
-
RE: Has anyone bought and tested the TM TQS?
@AviationPlus
Yes i have activated the vitual buttons, and no they are not “recognized” allways thats why i also used the “release” workaround.But with another Sim they are recognized were well so, i left it activated.
I can make some better shots von diffrent angle if your interessted ?
-
RE: Has anyone bought and tested the TM TQS?
Your are correct, and exactly what support wrote to me.
The software only shows connected if ONLY the panel is connected.
And they gonna make it better in later releasesSo you can address both in the T.A.R.G.E.T when you create a profile, where the additional axis is also added from the panel
In the Picture you can see all TQS axie + the panle axie