@Icarus simply beautiful. Thanks!!
Posts made by Sabert00th
-
RE: Falcon 4.0 Silver Jubilee block 52 skin
-
Never used VR
I’ve never used VR and thinking about purchasing just for BMS. My question is, how does it all work together? Assuming you still use HOTAS, keyboard etc. If that’s the case, how do you interact with HOTAS and keyboard while wearing VR goggles… fumbling for switches etc. etc.
I have Voice attack but even with that it seems you would have to interact with buttons and switches etc.
-
RE: Falcon BMS 4.37 VR READY "and Beyond" Trailer 4K
Purchased my copy when it first came out and still have the original receipt etc. Please hurry though with the graphics, I’m getting old (60) and would sure love to try it before I can no longer fly.
-
RE: CTD: Can't even Taxi
Ok guys, I was leaning towards my video card the other day but it worked flawlessly during several 3DMark stress tests. So then I figured must be something else.
Low and behold my system shut down and kept trying to restart and I knew there had to be a short somewhere. I unplugged the power from the card and the computer stayed on instead of trying to restart itself every few seconds. Needless to say, I removed the 2070Ti and tried it in an older system I had and the same issue.
I decided to take a old 6790 card from another system I had and put it in my gaming system and it booted. I then download all the latest drivers and then started Falcon and everything works . It’s a very slow card and I can’t play it in high res, but it does work. I have an RTX 3070 on the way.
Anyhoo, I disassembled the 2070 To and wouldn’t you know it, the graphics processor had several cracks in it and pieces of the metal had broken out. When the new card gets here, I’ll let you know how it goes.
Thanks for your help.
-
RE: CTD: Can't even Taxi
@airtex2019 The only file that was in that directory was the one I posted. Interesting that file does not exist.
-
RE: CTD: Can't even Taxi
@Seifer I had very modest OC but put everything back to factory and it still had the same issue. I am leaning towards the video card though.
-
RE: CTD: Can't even Taxi
@Seifer I have uninstalled and reinstalled 3 times and same issue.
-
RE: CTD: Can't even Taxi
@airtex2019 Where can I find the *crash.txt log. This happens in the TE although it could happen in campaign but I haven’t tried that.
The steps are, for example, doing the benchmark TE, I am put in the cockpit, I throttle up and usually after just after making the right turn to the taxiway it goes CDT. This happens in nearly every TE. Ground TE, CTD before I make it to the runway, Landing TE fly for very short time and CTD.
I did not have any extra theaters or any mods to the game. I will say though, when I could not get the included theater to work, I downloaded the newest Taiwan theater and it does the same thing.
-
CTD: Can't even Taxi
All of the Falcon Versions up till now (4.36) worked flawlessly for me over the years. Now with 4.36, 4.36.1 and 4.36.2, I can’t even taxi more than 100 yards and CTD. Every time. Sometimes even if I just sit there and not move, it CTD in about 30 seconds. Hopefully someone can help.
System is ASUS RoG Strix Z390-E, i7-9700k, Winbdows 11, 64GB DDR4, Nvidia RTX 2080Ti, 3840x2160 native resolution.
BMS version 4.36.2(x64) Build 26508Crash File from BMS folder:
https://1drv.ms/t/s!AotdS9kT9bPlj1Rfttk4wetw2NUv?e=eFBJKa
Dump file from Windows"
-
RE: Cougar's condition…...and thanks for your support
Good luck from another in Wichita Falls. I hope all goes well and without any complications with a speedy recovery.
-
RE: Falcon MFD Software for android tablets
I can’t seem to get the program to work with 4.35 or at least totally. I can get the tablet and desktop to communicate but it doesn’t accept all input. It accepts the input from the ECM panel and when if I turn on FCR from the computer it shows up on the tablet but it will not accept any input from the tablet. The debug window shows SimCBEOSB_1L is invalid.
I have check and double checked and everything in the keyfile is correct and using the BMF - FULL keyfile. Is there something I’m missing that it will not accept these keystrokes?
-
RE: JanHas Models & Skin Thread -Compatible with 4.36
Any plans of creating the Wraith aggressor 89-048
That would be a cool addition.
-
RE: New free MFD/ICP app to control Falcon BMS from touch devices
I have tried for hours but I can’t seem to get this program to work 100%. I can get it to do nearly everything except accepting input from the tablet. It shows in the response that the keystroke is not valid? So the BMS Server is communicating but just not accepting all inputs. I can use the EWS and it works fine but nothing for the MFD’s. I have checked, double checked and triple checked and the keystroke matches.
Example is I press MFD button #1. Server says keystroke SimCBEOSB_1L is not valid. I am using the BMS - Full keyfile and the keys match. SimCBEOSB_1L is assigned to 0x2 6 which is correct. Is there something I’m missing here?
Sorry, this was posted in the wrong thread. It should’ve been in the FalconMFD Software thread.
-
RE: BMS 4.35 U1 - How to Express the Appreciation?
Super great job DEVS. I don’t know of any other Sim that has brought so much dedication and for so long. I have seen this come a long way since I purchased it when it first came out in the late 90s. Still have original binder manual, disk and purchase receipt. Through the years I’ve tried Open Falcon, Free Falcon and BMS. Keep up the good work, I appreciate all that you do. Can’t wait to see what DX11 brings!!!
-
RE: Can you "un-boresight" Your Weapon/Rail
Well just call me stupid. That worked Amadeus and not sure why I didn’t try that in the first place.
-
RE: Can you "un-boresight" Your Weapon/Rail
I will give that a try tonight sometime. Thanks for your help.
-
Can you "un-boresight" Your Weapon/Rail
Well I was doing the training mission for the maverick and I TMS up to stabilize target, go to weapon page, stabilize on target and boresight it. Then I realize I was not on the correct bldg. :x and couldn’t figure out a way to undo my action. If it’s in the manual, it eludes me. Thanks
Well I did find something in the 2nd maverick training that says to select MRM mode and back to A-G mode. I’m not home to try that but I’m almost sure I did without success but will give it a try anyway just in case.
-
VSYNC Always on
Been using Frame View to try and get the best FPS etc and one thing I noticed is no matter what I do, Vsync is always activated. It is turned off in NCP and within the UI but every time I start BMS Frame View shows that is is on. I believe it is on even though the Vsync is not checked because the framerate while sitting in the UI menu is reported at 60 AVG. All I have to do is go to the Graphics page and hit apply, without touching anything else and Frame View shows Vsync off and framerate goes to 167.
Is there a setting somewhere that I’m missing to turn Vsync off all the time?
-
RE: Does Vietnam theater work with BMS 4.35?
I tried and it would not install. Says 4.33 not installed.