Ff you could have one thing in the next update it would be…
-
From f-16.net:
“Once the pilot starts up the jet and powers on the JHMCS system he will need to perform a quick system calibration to align the system. Once he enables the calibration, he will have one X in the HUD and one X in the visor. He will then do a course alignment by aligning the two X’s and pressing the Z-axis on the curser (on the throttle). Then he will do fine alignment by first slewing the X’s up/down and sideways, followed by an alignment of the roll axis.”And it’s also more detailled described in the MLU M3 update document found online
Yeah - that sounds both appropriate and familiar…
-
i have hard time with markpoints ,in the IAM training mission i am trying to duplicate the mission with jsaw as the manual sais the training manual i mean.
when i try to set a markpoint in ded fcr with tms up, i loose the whole ground radar image and fcr turns to black .to resolve this problem no CZ helps but only to put air to ground mode again. i also tried LGB training mission and tried to set a random markpoint to watch the behavior of fcr. when i set the markpoint active with M-SEL the mark point moves away from its previous thesis that i wanted it to ,to fix this i had to CZ and the markpoint returned to the previus thesis that i put it onthis summer i read the whole 4 manuals, i am reading and testing reading and testing ,i read about system delta issue, . so i wish developers concentrate on this . One more thing if you are looking with ground radar and you dont CZ every time when you move your cursors ,when you designate a target for example or you dont cz when you use snow plow then you have a good messed up ground radar.
i know that you know about all these issues but i thing its mandatory to fix this in the next update .You have time for iff or whatever but i think you must fix this asap
thank you
-
:munch:
-
@vfp:
i know that you know about all these issues but i thing its mandatory to fix this in the next update .You have time for iff or whatever but i think you must fix this asap
thank you
… and if you send us your PayPal id, all dev can also send you 100$ to thank you for your priority task advice.
-
Ha!Ha!
Dee-Jay, your response is called HUMOUR !!
there’s a long time I haven’t a good laugh like that -
@vfp:
i have hard time with markpoints ,in the IAM training mission i am trying to duplicate the mission with jsaw as the manual sais the training manual i mean.
when i try to set a markpoint in ded fcr with tms up, i loose the whole ground radar image and fcr turns to black .to resolve this problem no CZ helps but only to put air to ground mode again. i also tried LGB training mission and tried to set a random markpoint to watch the behavior of fcr. when i set the markpoint active with M-SEL the mark point moves away from its previous thesis that i wanted it to ,to fix this i had to CZ and the markpoint returned to the previus thesis that i put it onthis summer i read the whole 4 manuals, i am reading and testing reading and testing ,i read about system delta issue, . so i wish developers concentrate on this . One more thing if you are looking with ground radar and you dont CZ every time when you move your cursors ,when you designate a target for example or you dont cz when you use snow plow then you have a good messed up ground radar.
i know that you know about all these issues but i thing its mandatory to fix this in the next update .You have time for iff or whatever but i think you must fix this asap
thank you
vfp, can you please forward your suggestions on Markpoints and System Delta’s/CZ to Lockheed-Martin? They may also find your comments useful.
-
vfp, can you please forward your suggestions on Markpoints and System Delta’s/CZ to Lockheed-Martin? They may also find your comments useful.
So system delta is normal and not a bug so when you create a mark point you have to
Cz all the time?If so I feel so embarrassed. Lol
Can someone explain what system delta exactly is?
-
@vfp:
So system delta is normal and not a bug so when you create a mark point you have to
Cz all the time?If so I feel so embarrassed. Lol
Can someone explain what system delta exactly is?
Yes. Don’t be embarrassed. It was ‘funny’ because you were so earnest requesting a RL functional feature be removed that had recently been added to better imitate the real jet.
System Delta is the difference between current cursor (or SPI) and your current steerpoint. When you make a mark point, then M-Sel, you make a new steerpoint. The system delta you introduced in slewing the cursor/SPI in the first place has to be zero’d out (CZ) to put the cursor/SPI on the intended spot.
This video may be more useful than my ham-fisted attempt at a description:
-
is updatey to for helping non english with install and make an auto run,
-
If I could have one thing… better performance.
-
How about a fully modular systems framework so that in the future genuine, independent avionics and weapon system modules can be developed and added to the BMS?
A huge ask for sure, but the ability to fly other aircraft with avionics, radar, weapon systems that are truly authentic to the aircraft and era would give BMS a long lease of life and extend the community even further.So the have the ability in the future, hypothetically speaking, to have people develop not only a gorgeous new F-14 Tomcat model but also a new cockpit with an accurately simulated AN/AWG-9.
So that looking down, you would look at this, rather than the RWS/TWS mode of the APG-68(V9).(I know what Dee-Jay is going to say but hey, doesn’t hurt to ask? )
-
You can even ask for 1.000.000$ … no problem!
-
Oh dear Santa I’ve been a good boy this year. I know it’s not over yet but since I’ve been this good till now I’m granted for my wish and I’ll do my best to keep up.
So here it goes:
Please do all realistic requests posted here, oh and DJ meant 1.000.000$ for each member here!!!Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk
-
-
Hi,
In next episode I would like to see Raytheon-Litton AN/ALR67(V)3 , found on -18’s family is able to show naval/unknown threats (which currently are not showing) .
. so I can at least ‘suspect’ when: <10> flap-lid (naval) / sa-n-6 from Slava before it blasts me outtah blue.…just a few finishing touches. …Not quite a 1000000$ heh ?
Thanks
-
You can even ask for 1.000.000$ … no problem!
I am gladly joining the queue.
Sent from my F3213 using Tapatalk
-
BMS is an F-16 simulator, firstly the devs work’s-create-updates F-16 variant sys and avionics and then"possibly" all the other a/c could configured but based on core engine of an F-16 simulator
-
Oh dear Santa I’ve been a good boy this year. I know it’s not over yet but since I’ve been this good till now I’m granted for my wish and I’ll do my best to keep up.
So here it goes:
Please do all realistic requests posted here, oh and DJ meant 1.000.000$ for each member here!!!… and I’ll second this. Especially if it would end with a more functional Tornado cockpit (preferably in full, heh heh heh)
With best regards to all,
-
This post is deleted! -
One step towards what u describe is the avionics configurator.
So a first step is done.
It is one layer below thus specific to F-16 but the logic is the same.Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk