BMS Other Fighters Mafia (BMSOFM) Journal
-
@Mav-jp said in BMS Other Fighters Mafia (BMSOFM) Journal:
@drtbkj said in BMS Other Fighters Mafia (BMSOFM) Journal:
Hi, All. I’ve been afk for a couple of days, but as the poet said, I’m baaack.
Asleepwater, I just installed 37 and haven’t even been inside , yet. So, it’s hard to say exactly what we plan to do, beyond the promise that we will continue to do “our stuff” on the Other Jets. You asked specifically about Hornet/Other Jet avionics. In the past we have been limited in that regard due to lack of hard code access. A very exciting part of 37 for me is finding out if you work with the files differently… I took a very brief look at the files on the way here . The acdata files look the same and Maria Files are not in the stock F-18C. The good news our Art files are in so the cockpit hotspots should be good. So, a very preliminary Plan A will be to put our acdataFiles in 37 to see how they work. Seifer says very little was done to the Hornet, which frankly to me at least is good news. We won’t have to start from scratch. Then, an OFMKTO 4.37, then the other Theaters.
Seifer, thanks for the post. I can’t wait to fly 37! We’re also interested in the "new " bird you mention. Please pass alond to the Dev’s that our offer to help is still there.
Jeckal, I know you want to know about the Tornado. The good news there is is if the Hornet FM files works, the Tornado’s should too (cross fingers)F18A and C shall have hasNASA 2 in their AFM files
Yes, Mav, that is true, and thanks for that. In fact, my complements on the “stock” 18C model. The 18E does not, have HN2 and hence no autothrottle, etc…
-
Good Day, All,
Todays update is about OFMKTO and the other Theaters we work with for 4.37. At the moment we are working on some jet-specific projects , but the Theaters will be coming. Eddie is telling me Brother CCC has given us new jets. We’ll also soon be talking with Brother Chuckles and hopefully others about moving forward. Also, there is the question of integrating 4.37 things like the new ECM,CATM,etc. into our stuff.
We are unsure, given how well our transplanted Theaters are “talking” to 4.37, whether they will be Hotfixes or Standalones. But, they will have Installers -
are the files developed by the OFM good for every theater or just select theaters?
-
@JUmpstart5179 Generally, we say that our flight model,etc, files work with our OFM Family Theaters . Those are Theaters we make ourselves( OFMKTO and OFM-Balkans) and those we collaborate with. You can tell which they are as we put “OFM” in their names for that reason. However, we have tested our acdata files in the stock 4.37 KTO without disaster, specifically the F-18E. You may end up with the wrong cockpit installed, but that is an easy fix.
Whether your jet will have the new functionality like the ECM changes is unclear ATM. I can tell your “our” F-18C has the new RWR “chevron” function in the OFM Theaters in 4.37 . IDK if that will be the case if you put our files in the stock KTO. IMHO, it will, but let us know if it doesn’t
Also, PLEASE note, we have not tested our files in Balkans or any other non-OFMF Theater .
My advice, and what I personally do, is test but proceed with caution, with backups at each step. -
HI drtbkj. Do the latest OFM scripts and developed model files have a separate plate or a page, in which various file download links and manual links are stored? So you can find it quickly. You can also quickly update the link.
-
@asleepwater Hi, there. I’m not sure I understand your question. If you mean in the Mafia Files, then the answer is yes. For example, https://www.mediafire.com/folder/g021lul58qoj5/1799(f18c.Install+Pack+ver.12.22.22) will get you the current F-18C Files.
If that’s not what your asking, let me know .
BTW, everybody, when I get to the 4.37 Mafia Files( not even 3-4 Mafia Weeks ), they will look different. In 4.37 the way the Art folders are organized has been changed, and we will be going to that method ourselves. -
Good Day, All. Here’s an Update: Today we’re working on a few things. Mainly, the aforementioned Art file conversion, CATM and the new mirror mod , and the new ECM capabilities in our Theaters . We have decided to go with the IDIAS format for a couple of reasons.
One thing I’m having an issue with is CMS Left. The f18C,E, and F-35C ( my current main test ac) are still doing the old method of CMS left does Manual Prog. 6, even though my CMS left is mapped to the current call back. I’ve read IDIAS is modeled only to certain jet variants, and I’m wondering if these jets are not “on the list” as it were. So, can someone tell me if you’ve found a jet with working IDIAS, and if so which jet it is?
When/if we get it working, then I’ll work on how to get one flare per press, as that’s how I set my CMS up. -
@drtbkj Have you tried the HAF jets?
-
@unkindled Not yet, thanks for the tip
-
@unkindled said in BMS Other Fighters Mafia (BMSOFM) Journal:
@drtbkj Have you tried the HAF jets?
Unkindled, I found the f16cm52 HAF which does indeed have IDIAS. Also, CMS functionality was answered. It works “the old way” when jammer is not operating, and to control ECM priority when it’s operating. We’re moving forward with putting this function in the Hornet and hence the Other Jets
-
Good day, All. We have “installed” IDIAS in the F-18C and also tested in the F-35C. To do so, go to x/4.37/data/OFM Theater/sim/acdata for your jet and change avionicsRWRType to 3. Then , you paste …
SimXMTASPISOper 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Operate”
SimXMTASPISStdby 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Standby”
SimXMTASPISToggle 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Toggle”
to x/4.37/User/config/BMS-Auto.key and assign a keybound and/or HOTAS command as you prefer.
Page 132 in the Dash -34 describes how to use it. -
@drtbkj said in BMS Other Fighters Mafia (BMSOFM) Journal:
Good day, All. We have “installed” IDIAS in the F-18C and also tested in the F-35C. To do so, go to x/4.37/data/OFM Theater/sim/acdata for your jet and change avionicsRWRType to 3. Then , you paste …
SimXMTASPISOper 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Operate”
SimXMTASPISStdby 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Standby”
SimXMTASPISToggle 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Toggle”
to x/4.37/User/config/BMS-Auto.key and assign a keybound and/or HOTAS command as you prefer.
Page 132 in the Dash -34 describes how to use it.But you’ll lose the HUD spokes when doing so?
-
@Scorpion82 said in BMS Other Fighters Mafia (BMSOFM) Journal:
But you’ll lose the HUD spokes when doing so?
That is indeed the trade off, you do lose the HUD RWR display. That is why there is some debate as to whether we include IDIAS in our upcoming OFM Theaters or go for the more realistic version with the HUD display.
Which would you like? -
the main question for me is what implications does it have on the ECM system? My understanding is that only the HOTAS function is affected? If so, I wouldn’t mind to change the RWR. If XMIT1-3 still works as intended I think the relevant functions are implemented.
-
@Scorpion82 said in BMS Other Fighters Mafia (BMSOFM) Journal:
the main question for me is what implications does it have on the ECM system? My understanding is that only the HOTAS function is affected? If so, I wouldn’t mind to change the RWR. If XMIT1-3 still works as intended I think the relevant functions are implemented.
I’ve been testing to try to answer that very question, primarily in the Dogfight module. The results are somewhat subjective. The questions are:
- Are there any noticeable difference in sensor performance between Avionics and ECM Priority . Answer: Unclear, at least in the close ranges involved in DF. I’m about to start testing in real missions.
- Is there difference in the jamming effectiveness, in terms of both the “old” jammer vs. IDIAS , and the 2 XMIT priorities. Answer: no degradation
-
@Seifer The .3dpit reload doesnt work for me even that i followed your steps. (Trying to update to see hotspot changes) do i need another command for updating 3dbuttons file ?
-
Good Day, All Here is today’s update…
- Preparations continue for the the release of our Theaters. Maybe 1-2 Mafia Weeks .We have projects going with the EF-18M and the F-15E and a lot of other goodies which we hope to include. We don’t foresee issues with including the new 4.37 mirrors and CATM. Although using IDIAS in-sim is fun, we have decided , after fairly extensive testing, to leave the Hornet,SH,and F-35C ECM’s in their current “naval” version. The realism of the HUD RWR display won out. Another factor in the decision was the ease of putting it in you jet-of-choice( see my post of 5 days ago)
- In our Discord yesterday the topic came up of what is the best way to get our data/files.etc. to the BMS Dev’s , to facilitate their inclusion in the base BMS. I reached out to Seifer who is going to suggest to Max a sub-forum called “Community Contributions” We want to avoid making the Devs have to deal with 'mega-threads"
-
@drtbkj You already have a thread here :
https://forum.falcon-bms.com/category/12/community-mods-tools
Radium
-
-
This post is deleted!