Reduced fps in Bms 4.33.1
-
Thanks for the Tip, will try it tonight. Maybe switching Tripple Buffering off too?
IIRC the general rule of thumb is to keep it on with V-Sync, I don’t think it helps with V-Sync off.
Settings maxed in the sim and much better performance than 4.32 with my i5/4670k, 16 gb ram, gtx960 4gb.
Thanks for the good news, that’s basically my system besides switch the gtx960 to a R9 290.
-
Runs smoother and looks better too!
-
On my rig everything runs comparable or better even with focus shadows on. Only exception is when I look backward and pull Gs -> “heavy” vapors on the LE kick in, and there is a big drop of fps (fps goes from 45 -> 22) even with reduced particles and Texture filterig Quality - High performance set in Nvidia Inspector. With “light” vapors no problem. In BMS 4.33 the dropdown is not so noticable.
-
What about TGP/Mav WPN drop?
-
Can´t notice a framerate drop.
On my system the opposite happens. I´m getting 25-30 frames more with 4.33.1
and this with a 5 display setup and running MFD Extractor. Good Job Guy´s:headb: -
Can´t notice a framerate drop.
On my system the opposite happens. I´m getting 25-30 frames more with 4.33.1
and this with a 5 display setup and running MFD Extractor. Good Job Guy´s:headb:Hello Viper - would you mind sharing your rig details please?
-
For shure
Intel Core i7-6700K / ASUS Z170 PRO GAMING Mainboard /32 GB DDR4-2133 / Sapphire AMD Radeon R9 390 OC Tri-X NITRO / Win 7 Pro / Displays: 1x Samsung 40" / 3 x 10" TFT / 1x 4,3" TFT / MFD & Instrument extraction via MFD Extractor.
-
@Red:
That’s weird because we noticed the opposite.
There is a huge improvement for many of the testers (but one actually) that reported more FPS with 4.33.1 than with 4.33
Actually 4.33.1 made 4.33 playable with all the goodies ON againproviding your details might actually be handy if you want further input on the issue ….
I also had a good improvement with 433.1 so strange…
-
I too got better frame rates with 4.33.U1 over 4.33 don’t know why and don’t care, just glad of them ;0) - many thanks.
-
I Tested with my 8Years old PC,
-I5 2,67Mhz
-SSD60GB- AMD R7 240/4G
4.33.1(FPS 30-51 with a bit Stuttering and not all Eyecandys on.)
With all eyecandys i have on this old Guy 25-31 FPS no external Windows(MFD etc.)
4.33 (FPS 30-38)I think 4.33.1 is Faster as 4.33 on the same PC
This weekend testing on my Flying PC
-
The reason for the better FPS is from some optimization that was done on the terrain rendering, so it should also affect TGP/WPN views because these are also drawing the terrain.
-
After a number of testing and setting all graphic parameters to the same point in both 4.33 and 4.33.1, verdict is there is an improvement in fps in 4.33.1.
Thanks for all the advice guys…… Red dog, ihawk.
Great work bms development, you guys rock. -
- 20 fps here on a three monitor setup. Not bad guys. Not bad
-
For me too at least +15 fps compared with .33 base. Great work!
-
Same here I got + 15 fps compared with 4.33
Thank you guys ! -
I have two monitors, the main with 1920x1200 and the sencodary with 1280x720 (MFD’s and instruments) to flight without GM Radar and TGP, my FPS are between 40 and 39 in the mission “instant action, moving mud” with it activates go down to 25-30 FPS. When I throw chaff and flares down further to only 14 to 15 FPS even with activated “system particles reduced”, I do not notice any change to enable or disable that setting. In the previous version I had almost the same, perhaps 1 to 2 FPS’s more in the latter.
My system, AMD Phenom II x4 965 (3,6 Ghz per core), Nivida GFX 560 Ti DirectCU II, Windows 10 x64.
-
Just flown a small TE somewhere around Mandumi ,
ok Terrain mostly covered with the Dust but… holy cow……:bowd:Here a short trip to Aviano
-
The reason for the better FPS is from some optimization that was done on the terrain rendering, so it should also affect TGP/WPN views because these are also drawing the terrain.
In fact I tried lgb amd mav training omission and I get no fps loss with both tgp and wpn Windows shown…but I have v-sync so it is fixed at 60fps while on 433 I had 50 with both windows on and 60 without on the same missions.
-
Is there a way to show fps with BMS? I’ve tried with the AMD gaming evolved app and it doesn’t work.
And yes, I tried searching for this answer myself.
-
ALT-C, then F (for me)