I have no idea. I reverted all updates but maybe not the gfx ones… I went into my Nvidia setup program but have no idea what the configuration should be. If I play around with it, BMS 4.32 stop working. Ideally I’d need to know what the graphic card configuration for 4.33 should be.

cheers mate

Hi Cuca,

Do you ever fix your “overclocking has no effect” problem finally?

I have problem rather similar to yours.
My system is:
i3 o/c to 4.4ghz
4gb ddr3
gtx 560

so far I get around 38 fps when playing training mission 4 night ils landing with this setting.

And then I have installed zotac gtx970 and added more ram: total now 8gb ddr3.
However with the same setting and same mission as above,
I only get around 44 fps, so there is not much improvement here.
https://www.benchmarksims.org/forum/showthread.php?24925-GTX970-owner-please-post-your-fps

Maybe something is causing bottleneck in my system.
I do not know what.

Can you tell me how do you fix yours?
Please help.

https://www.benchmarksims.org/forum/showthread.php?24349-Release-Grb2fmap-GRIB-to-BMS-Converter

BMS 4.33 Stong DPRK theater. Win 7-64, Intel I7. Campaign mission has 4 line boxes on the KTO planning map that use all the available line WP’s. The campaign planning engine does not recognize when a line is deleted so that a new line can be subsequently placed on the mission planning map. Save and exit the mission, then enter mission planning again and a new line can then be placed on the map. Weapon Delivery Planner also will not permit deleting the campaign map lines in the DTC. If the lines are deleted in WDP and the DTC is saved, the deleted lines are restored.

Hi!
Due to being too unimaginative to read out the bsod file, I reinstalled BMS et voila, it runs as it should…

Thx for assistance anyway!!

Alan,

I had the same problem with the triangles in the sky, solved it by downloading and installing the latest driver for my Intel HD GPU from the Intel website.

Hope this helps?

That’s common to such crashes.

Your focus should not be focused on the rez but on the original crash.

amd video settings with new crimson drivers you are able to set in manual mode all values you want in overdrive settings, the only thing I notice with new drivers is in all reboots the fans start in automatic mode at 45% instead manual as I set.

PROBLEM FIXED!
There was a problem in the user directory, I replaced it with the original one (from setup)
and it worked again.

I am having trouble reinstalling BMS.

I am mounting the falcon 4.0 ISO, and then extracted the BMS setup, but whenever I open the setup file, it gives me this error:

“The registry entry points to a folder that does not contain a valid Falcon BMS 4.33 install. Please restore the missing files and try again or remove the registry entry (HLKM\SOFTWARE\BenchmarkSims\Falcon BMS 4.33) to be able to install the product again. Path: D:\Games\Falcon4.0\Falcon BMS 4.33”

I go into regedit, and I can find no such registry entries…

UPDATE: found the reg files in the wownode portion… deleted those and viola

Polaris,

Just did a little check, no problems on my side (btw, I use Yassy’s profile), i did notice though i have the roll option not ticked in the profile setup.
When i tick the roll option, the Track IR gets a lot more erratic.
The problems are already visible in the Track-IR software/profile setup. Problems occur when looking/rolling to the right, left no problems.
I noticed that when it occurs, in the setup 1 of the greens is less bright or seems a bit streched.
Did some testing with roll disabled and enabled, i don’t really notice any benifit with roll enabled (on the working left side :D), right side was a lot more bouncy with roll enabled.
At my side, it’s for sure not a BMS problem, problems are caused by the track-ir.
So just disable the roll, you won’t notice it during flight and your problems are solved.:p

Guys a litlle help here till a week ago Lod editor was working perfectly in Windows 10 prox64 without problems… today i wanted to edit some things and suddenly doesnt… any suggestions? I even redownloaded and still the same, administrator rights also

You can’t host, so you don’t have proper port forwarding. Maybe your fried has set g_bHostAllowsDubiousConnections 0

@I-Hawk:

Game timer maybe… but I’m not sure that’s an easy one.

Indeed it was related to game timer. Found and fixed.

@mppzgz:

As a c130 pilot, aircraft tries to head up the wind. That is because it is the minimum energy situation. The bigger the tail the bigger is this effect. I don’t have hud, but have a track pointer in the hsi. Supposing left wind, the effect will be an small yaw to the left and a change in track to the right. The yaw due to the effect in the tail, the change on track (fpm) due to the relative movement of the air mass and the ground.

In f16 I should expect the same but I thing that FCLS minimizes the yaw movements, but still it should have a small movements. FCLS corrects it near real time, but no instantaneous.

My two cents

it has yaw movement 🙂 ….here the burst is only 4 knots so the movement is small, but create 15 kts burst you will see the girouette effect 🙂

many thks guys……yes I am still do my training …

If you are in Windowed Mode, go to your Extraction options. Find Main and set the coordinates to all zeros. This will place the screen in the upper left side of your monitor. See if that helps.

It appears automatically when the RAM is overloaded

@rtopinka:

Hello, so it is limitation of BMS 4.33 to run it BMS again with same FPS? I am asking because nobody complaint about it and I thought some settings of my PC is not ok, thanks for reply.

well it’s an old matter that was discussed in the past and the restart BMS after each mission is known to most of us.

@FeldTheAce:

I still have the problem to get my game running. I hope anyone cant help me. Its one week now since i wrote this and noone seems to care. Well, when this is a technical support forum….why is there nobody who can help me or just can say: Sry dude but this problem isn`t fixable 😕

Hi FeldTheAce

You cant just post “I cant get the rez I want some one help Me” and expect a magic answer.

You supplied no background info or qualified your hardware, do you expect people to have to drag that info out of you in a halve dozen posts.

Some basics.
Are you new to Falcon, or even computers, do we expect you to know terms like “Native Resolution”, “CCC” or “NCP”

Your hardware enviro……
What GPU, CPU, and Computer type (PC, Laptop, Console is it) Brand/Model.
What OS do you use.
What are you using for a display screen, Monitor, TV or other. Brand and model (LCD, plasma, size, native res)
How do you connect to that device, DVI, HDMI, Display Port, VGA D-sub or other.

Does your PC recognize your Monitor or is it just “Generic PnP Monitor”
Is your Monitor plugged into anything else, Digital Tuner, Multi Media System.

Help others help you. Be bold and speak up.

Regards