4.36 Incredible Performance Boost
-
From 38-42 FPS in the 4.35 bm te wide FOV to maxed @ 60 now
-
First thank you for 4.36 update.
On my old machine shadows still kill the fps in half. No shadows -> perfectly fluid vsync 60fps on ramp Osan - Daegu TE. I would like to have more control over the shadows radius than shadows on/off - I mean to have shadows for virt cockpit and no so much outside to reduce the load. -
As for me, categorically not, TGP+MAV ruins the FPS up to 30. Also, airfields began to lag more. I had some performance losses in 4.35, but that’s because the bottleneck in heavy scenarios was the CPU, not the GPU. BMS works in 4K on 2080 RTX.
-
@Foxtrot701 Turn off antialiasing and all in game itself and create profile in nvidia control panel for bms.exe - NOT the launcher.exe…
In profile setup just what you want , AA8 AF16 etc … all bells and whistles , see the change., … you must select override app settings for AA/AF.
That works with anything, not just BMS. … but biggest performance boost was in one other sim cough … not dcs… cough
I have amd rx580 and is capped at @60 even with tgp/mav , in 4.36. , that is in fullhd, 1920x1080…
I’ve tried 2k (as i run dcs) , but BMS doesn’t love something, no full screen , just 2k window centered even if set to exclusive fullscreen … weird, bah, but ok. fullhd is enough.
Cheers
-
Has anyone been able to get ReShade to work with this? I’ve tried, but being on Linux it’s always hit-or-miss, and I missed. Not sure if because Linux or because impossible anyway… ?
I’m mid-campaign in .35, so I’ll have to wait a few in-game days to jump to .36 and test.
-
@white_fang said in 4.36 Incredible Performance Boost:
@Foxtrot701 Turn off antialiasing and all in game itself and create profile in nvidia control panel for bms.exe - NOT the launcher.exe…
In profile setup just what you want , AA8 AF16 etc … all bells and whistles , see the change., … you must select override app settings for AA/AF.
That works with anything, not just BMS. … but biggest performance boost was in one other sim cough … not dcs… cough
I don’t believe the Nvidia Control Panel AA affects BMS any longer. Stopped working with the updated graphics engine from 4.35.
-
@GhastlyTT … strange, i don’t know , I have amd and yes I’ve had similar problems with profiles before, 1-2 years ago.
Also , when app was run with/out admin privs , also did effect profile loading … or not.
But, to this day i’m happy as “everything” works as advertised.
I’ve never had problems with Bms 4.35 profile … but then again , I don’t use Nvidia control panel… ah, well no harm in trying.
Cheers
-
@white_fang In fact, i have never touched the BMS GFX settings in any versions, nor the Nvidia control panel, there’s nothing to do there.
-
@PotatoPilot said in 4.36 Incredible Performance Boost:
Has anyone been able to get ReShade to work with this? I’ve tried, but being on Linux it’s always hit-or-miss, and I missed. Not sure if because Linux or because impossible anyway… ?
I’m mid-campaign in .35, so I’ll have to wait a few in-game days to jump to .36 and test.
There might be some not so good news on running BMS under Linux front, it seems 4.36 is kinda problematic, see this thread:
https://forum.falcon-bms.com/topic/22261/falcon-bms-4-36-on-linux-wine-unsupported
A pity, because 4.35 was running great and damn fast. -
@PotatoPilot I have a working Reshade setup in 4.36. (It’s currently removed so I can compare frame rates. I believe it’s costing me about 30% with the minimal added shaders I’ve enabled so far…)
Make sure you get the latest Reshade version (I have 5.0.2 currently) and “install” it on your “BMS 4.36/Bin/x64/Falcon BMS.exe”…
If you wish, I’m happy to share my “reshade-shaders” directory content and relevant “*.ini” files.
Despite the wonderful X11 work the BMS devs have done, I find BMS more appealing/realistic with a well-tuned Reshade addon.
-
In response to a chat message from danaos75, I’d like to provide his requested copy of my: Falcon BMS Config, and Falcon BMS graphics setup, and NVidia Control Panel setup.
So here’s my BMS Config file:
NVidia Control Panel settings:
And BMS Graphics Setup:
I hope this helps, danaos75 (and perhaps someone else).
-
@Slothrop Thank you so much for this, I will begin testing with my setup to check the results. I had a major fps impact on 4.36 with my setup (20%-25% on the Benchmark TE, idle sitting on the runway) . Hope this helps me too!
-
Hard to say for me, I only saw a slight drop of FPS during the rampstart in the middle of several hangars…but the most visible point is like a kind of stuttering when you move your head with TIR: it doesn’t seem to be fluid or smooth…and the further away you get from the hangars, less the stuttering is noticeable
-
@danaos75 I should have ID’d my computer, as well, so you have a frame of reference.
It’s a 2012 CyberPower Black Pearl:
-
Intel i7-3820 3.6 GHz Quad-Core CPU
-
6 GB 1600 MHz RAM
-
NVidia GeForce GTX 690 with 4 GB VRAM
-
Windows 7 SP1
So it’s a bit long in the tooth, but still capable. (The only game that overtaxes it is Metro Exodus, but that’s a notorious fiend for CPU and GPU.)
When running BMS 4.35U3 on “TE_BMS_14_No_ More_Energy”, it used to get ~40-55 FPS.
In 4.36, I generally see ~70 FPS. The slowest frame rate happens just after entering 3D; at TOT, with a dozen SA-5s and SA-10s in the air and 4 flight members dropping AG, it rarely wavers…
So I’m wondering if the devs not only optimized the DX11 code, but also found some way to multi-thread the CPU side. (I should benchmark and find out.)
All in all, they’ve done the impossible: implement a ton of new, complex features and graphics while greatly improving performance!
-
-
@airtex2019 said in 4.36 Incredible Performance Boost:
@ericfa2a Still early impressions, but I notice my GPU (GTX 1660 Ti) is working about 10-20% harder (and running 10-20% hotter) but v4.36 seems to be issuing about 10-20% more draw operations, and everything looks 10-20% better, so that’s fair.
To do max antialiasing at 4k 60hz, I may have to upgrade to a RTX 3060 Ti like you though…
Why oh why would anyone ever need max anti-aliasing on a 4K monitor?! lol
-
Yes, I also noted a big increase in fps. BMS has always been more dependent on the CPU speed and the GPU has been underused, but with the change on the graphic engine introduced on 4.35, I guess stuff that used to be done in the CPU are now handled by the GPU. And who knows what other improvements the devs has been doing.
I have a modest system and Falcon BMS runs really good. Now sitting in the canopy of the benchmark TE a get around 40 fps, with BMS 4.33 was just around 20 fps or less in a very busy airport under a thunderstorm, with 4.34 it increased to 30+ if my mind does not play tricks on me. The original Falcon 4.0 hardly run on the computer I had at the time.
Oh, didn’t I say that I am very happy?
-
@haplokuon Original f4.0 runs like crap on todays computers
-
@dumba ahaa, you see, it was never about the hardware… the older the software , the slower it runs
-
@SemlerPDX my 4k monitor is a 48" LG OLED CX TV. It has the same pixel density of a 24" 1080P monitor. In fact, when I’m using my computer for non-gaming computer things, I use fancy zones to set a 24" 1080x1920 zone right in the middle of it because it’s just more comfortable for things like browsing webpages. I guess what I’m getting at is…for me, the jaggies look the same, there’s just more room to see them max the AA!
-
@SemlerPDX I’m not as cool as ghastly, only a 36 inch monitor … but I can still see some visual improvement from 4x to 8x AA… probably 4x would be fine tho, if I’m being honest
It’s really just the side bars of the HUD that are bothersome. Would be nice to have an option to just not render those… maybe I should try my hand at 3D modelling and make a cockpit mod, to delete the hud frame? then my gpu would run a bit cooler…