0.7.0 - 08-May-2023 - 21:30 Z
Trigger File

#IF_NOT_CONTROLLED (Thank to @MaxWaldorf , https://forum.falcon-bms.com/post/369213) #IF_CAMPAIGN_DAY #SHIFT_INITIATIVE Add information about movies triggers link to Strings.txt Add link to KTO PAKs list

I share bellow and attached the list of KTO PAKs to be used in trigger file.

Quite useful to trigger PAKs priorities changes during the campaign and especially if you would like to set precisely the PAK priorities at the very begging of the campaign.

////// // List of PAKs for KTO Theater BMS 4.37.2 // For each PAK, 2 lines : // Comment line : PAK nb - PAK Name - Campaign ID // Command line : #SET_PAK_PRIORITY [team#] [pakID#] [priority#] // Use the lines you need and set the desired priority by changing the last figure (ie replace 0 by value between 0 and 100) ///// // PAK1 - Taejon City - Camp ID 580 #SET_PAK_PRIORITY 2 580 0 // PAK2 - Chonju City - Camp ID 556 #SET_PAK_PRIORITY 2 556 0 // PAK3 - Gwangju City - Camp ID 539 #SET_PAK_PRIORITY 2 539 0 // PAK4 - Pohang City - Camp ID 511 #SET_PAK_PRIORITY 2 511 0 // PAK5 - Chongjin City - Camp ID 492 #SET_PAK_PRIORITY 2 492 0 // PAK6 - Daegu City - Camp ID 482 #SET_PAK_PRIORITY 2 482 0 // PAK7 - Wonsan City - Camp ID 404 #SET_PAK_PRIORITY 2 404 0 // PAK8 - Hamhung City - Camp ID 399 #SET_PAK_PRIORITY 2 399 0 // PAK9 - Ch'aryon'gwan City - Camp ID 464 #SET_PAK_PRIORITY 2 464 0 // PAK10 - Dongducheon City - Camp ID 232 #SET_PAK_PRIORITY 2 232 0 // PAK11 - Chuncheon City - Camp ID 319 #SET_PAK_PRIORITY 2 319 0 // PAK12 - T'osan City - Camp ID 235 #SET_PAK_PRIORITY 2 235 0 // PAK13 - Incheon City - Camp ID 223 #SET_PAK_PRIORITY 2 223 0 // PAK14 - Haeju City - Camp ID 246 #SET_PAK_PRIORITY 2 246 0 // PAK15 - Sariwon City - Camp ID 253 #SET_PAK_PRIORITY 2 253 0 // PAK16 - Kaesong City - Camp ID 234 #SET_PAK_PRIORITY 2 234 0 // PAK17 - Seoul City - Camp ID 228 #SET_PAK_PRIORITY 2 228 0 // PAK18 - Suwon City - Camp ID 302 #SET_PAK_PRIORITY 2 302 0 // PAK19 - Songnim City - Camp ID 257 #SET_PAK_PRIORITY 2 257 0 // PAK20 - P'Yongyang City - Camp ID 260 #SET_PAK_PRIORITY 2 260 0 // PAK21 - Changyon City - Camp ID 428 #SET_PAK_PRIORITY 2 428 0 // PAK22 - Sinanju City - Camp ID 452 #SET_PAK_PRIORITY 2 452 0 // PAK23 - Hoeyang City - Camp ID 411 #SET_PAK_PRIORITY 2 411 0 // PAK24 - Weonju City - Camp ID 416 #SET_PAK_PRIORITY 2 416 0 // PAK25 - Pusan City - Camp ID 417 #SET_PAK_PRIORITY 2 417 0 // PAK26 - Cheongju City - Camp ID 585 #SET_PAK_PRIORITY 2 585 0 // PAK27 - Jungwon City - Camp ID 590 #SET_PAK_PRIORITY 2 590 0 // PAK28 - Samch'ok City - Camp ID 602 #SET_PAK_PRIORITY 2 602 0 // PAK29 - Shenyang City - Camp ID 2663 #SET_PAK_PRIORITY 2 2663 0 // PAK30 - An-t'u City - Camp ID 2671 #SET_PAK_PRIORITY 2 2671 0 // PAK31 - Nachodka City - Camp ID 3342 #SET_PAK_PRIORITY 2 3342 0 // PAK32 - Hiroshima City - Camp ID 3433 #SET_PAK_PRIORITY 2 3433 0

https://drive.google.com/file/d/103zjVJtqiy-uGTRw6ZWvZUG8rQcKIpzt/view?usp=share_link

@CheckPoint hi. No. But i think it’s possible in the way described in previous post.

Hi. Thanks to all for answers. Ok so working on priorities i can pilot which kind of mission type the engine will frag.

I seen the video and it’s great stuff.

Many thanks,

Gundam

That’s not something you do with the falcon database editor but not MC…

Did someone already tried to decrease PAK priorities all other the map (ie only priorities below 2 for example) ?

@gundam Found.

AircraftTurnaroundMinutes = 60 (Falcon.cfg)

🙂

ciao Maxwaldorf!

Ok 🙂 i love the bms campaign engine anyway. 🙂

Gundam

Good Day, All. I am seeking input about how to control AAR tankers. Is there a way for a player to control tanker fragging? Simply put, if you want to use a specific tanker at a specific place/time and not what BMS “wants to assign you”, what’s the best way to do it? Is there a way get a specific assignment and not have to take human control of the tanker squadrons? That would work, but I don’t think the average player will want to do it.
The only workaround I’ve found is to delete all the UI-fragged tanker flights. Basically, treat it like a TE and it works . Obviously, though, that’s not realistic in a campaign

@MaxWaldorf said in Lookiing for map of Europe for Campaign in Development:

Just to be clear…
There is a Central European Theater in preparation with the next terrain engine of BMS.
Starting now building one for 4.36 is pointless…
By the time you get something mature enough, it will be obsolete!

So… my dream (and others too) is not dead yet!😀

Maybe in 4.37! 😄

<p>Hi, Snake. While this doesn’t help Amr much, perhaps I can help with your Amphib landing. What I did , via Mission Commander, was to add the Wasp ARG (put an AV-8B squadron on it[In some Theaters like Korea 2012 you also have the F-35 option]),and Newport ARG off the coast. Then I put my ground forces at the shoreline, set their waypoints, and off they went. <br /> I put the Newport in as the Wasp doesn’t land large tank forces The Newport LST’s are designed for that. They can each carry 29 tanks or 30 AAV’s, and each Newport ARG spawns with 2 Newports.<br /> BTW, bridge status wasn’t an issue in my case, but you are absolutely right that it can be a big factor. <br /> Hope that helps</p>

Hello gents,

I started editing some campaigns with MC, using MaxWaldorf’s video tutorials as a guide and the results so far are pretty good. Nevertheless, I encountered some minor problems and I hope to find the right way to solve them with your help.
I’ve moved some squadrons to different air bases, but then I loose the name of the air base and it shows only the object ID number ingame:

error_2.jpg

error3.jpg

So how can I revert back the name of the air base?

Cheers,

Airbuster

Through Mission Commander you have the campaign strings that are editable from there…

@gundam Founded!

ok. Thanks now i will think how to apply for my scenario.

Thanks again for your help.

Gundam

@oakdesign Hi. Thanks for your hints.

Ok the assumption is that red part do not select blue squadron, even for a mistake i mean. Doing so he will open “blue” map and see the blue forces…

A “protection” in the squadron selection was to avoid “intelligence actions” 🙂 did for mistake or maybe to watch other side intentionally.

Update from the front 🙂

regarding resupply i as blue received reinforcement after more or less 8 hrs with more F16 and Tornado in my squadrons.

I am going to understand how resupply works, and wich parameters i can changes/modify to control this.

From forum reading i understood it s linked to Airlift flights, Fabric and Power Plants distribution in your territory and so on. This seems quite logic but even not so easy to control/drive.

More update will coming.

Gundam

@maxwaldorf OK!!

hi MaxWaldorf,

Thanks for your feedback.

OK. Clear.

Gundam