@Steel:
Thanks for reply Malc,
I did as you said but still only shows route with STPT and no other information.
Argh, I forgot to say “Press Load button”
To reiterate:
Load desired Training TE
Open DTC
Click Targets on top row of buttons
Click Load button
Click Save button
To confirm, you can open callsign.ini in the User/Config folder with Notepad, scroll down until you see:
BEFORE:
ppt_0=0.000000, 0.000000, 0.000000, 0.000000,
ppt_1=0.000000, 0.000000, 0.000000, 0.000000,
ppt_2=0.000000, 0.000000, 0.000000, 0.000000,
ppt_3=0.000000, 0.000000, 0.000000, 0.000000,
ppt_4=0.000000, 0.000000, 0.000000, 0.000000,
ppt_5=0.000000, 0.000000, 0.000000, 0.000000,
ppt_6=0.000000, 0.000000, 0.000000, 0.000000,
ppt_7=0.000000, 0.000000, 0.000000, 0.000000,
ppt_8=0.000000, 0.000000, 0.000000, 0.000000,
ppt_9=0.000000, 0.000000, 0.000000, 0.000000,
ppt_10=0.000000, 0.000000, 0.000000, 0.000000,
ppt_11=0.000000, 0.000000, 0.000000, 0.000000,
ppt_12=0.000000, 0.000000, 0.000000, 0.000000,
ppt_13=0.000000, 0.000000, 0.000000, 0.000000,
ppt_14=0.000000, 0.000000, 0.000000, 0.000000,
lineSTPT_0=0.000000, 0.000000, 0.000000
lineSTPT_1=0.000000, 0.000000, 0.000000
lineSTPT_2=0.000000, 0.000000, 0.000000
lineSTPT_3=0.000000, 0.000000, 0.000000
lineSTPT_4=0.000000, 0.000000, 0.000000
lineSTPT_5=0.000000, 0.000000, 0.000000
lineSTPT_6=0.000000, 0.000000, 0.000000
lineSTPT_7=0.000000, 0.000000, 0.000000
lineSTPT_8=0.000000, 0.000000, 0.000000
lineSTPT_9=0.000000, 0.000000, 0.000000
lineSTPT_10=0.000000, 0.000000, 0.000000
lineSTPT_11=0.000000, 0.000000, 0.000000
lineSTPT_12=0.000000, 0.000000, 0.000000
lineSTPT_13=0.000000, 0.000000, 0.000000
lineSTPT_14=0.000000, 0.000000, 0.000000
lineSTPT_15=0.000000, 0.000000, 0.000000
lineSTPT_16=0.000000, 0.000000, 0.000000
lineSTPT_17=0.000000, 0.000000, 0.000000
lineSTPT_18=0.000000, 0.000000, 0.000000
lineSTPT_19=0.000000, 0.000000, 0.000000
lineSTPT_20=0.000000, 0.000000, 0.000000
lineSTPT_21=0.000000, 0.000000, 0.000000
lineSTPT_22=0.000000, 0.000000, 0.000000
lineSTPT_23=0.000000, 0.000000, 0.000000
and AFTER the dance:
ppt_0=787593.000000, 1135561.375000, 0.000000, 0.100000, M17
ppt_1=622794.750000, 1138136.375000, 0.000000, 0.100000, M19
ppt_2=681417.500000, 1537931.250000, 0.000000, 0.100000, M15
ppt_3=771120.000000, 1431281.625000, 0.000000, 0.100000, WLF
ppt_4=680248.500000, 1311476.625000, 0.000000, 0.100000, JLP
ppt_5=589328.000000, 1817606.625000, 0.000000, 0.100000, M27
ppt_6=0.000000, 0.000000, 0.000000, 0.000000,
ppt_7=0.000000, 0.000000, 0.000000, 0.000000,
ppt_8=0.000000, 0.000000, 0.000000, 0.000000,
ppt_9=0.000000, 0.000000, 0.000000, 0.000000,
ppt_10=0.000000, 0.000000, 0.000000, 0.000000,
ppt_11=0.000000, 0.000000, 0.000000, 0.000000,
ppt_12=0.000000, 0.000000, 0.000000, 0.000000,
ppt_13=0.000000, 0.000000, 0.000000, 0.000000,
ppt_14=0.000000, 0.000000, 0.000000, 0.000000,
lineSTPT_0=739693.500000, 1478173.125000, 0.000000
lineSTPT_1=717520.750000, 1855107.375000, 0.000000
lineSTPT_2=599958.500000, 1484793.500000, 0.000000
lineSTPT_3=739693.500000, 1478173.125000, 0.000000
lineSTPT_4=686793.250000, 1559595.250000, 0.000000
lineSTPT_5=686793.250000, 1559595.250000, 0.000000
lineSTPT_6=683938.000000, 1946585.875000, 0.000000
lineSTPT_7=533805.000000, 1946965.250000, 0.000000
lineSTPT_8=533997.250000, 1522068.500000, 0.000000
lineSTPT_9=684315.500000, 1946963.625000, 0.000000
lineSTPT_10=0.000000, 0.000000, 0.000000
lineSTPT_11=0.000000, 0.000000, 0.000000
lineSTPT_12=787106.250000, 1259472.000000, 0.000000
lineSTPT_13=552367.750000, 1274367.875000, 0.000000
lineSTPT_14=552443.500000, 1002100.125000, 0.000000
lineSTPT_15=552624.500000, 1001362.437500, 0.000000
lineSTPT_16=686687.500000, 1001362.437500, 0.000000
lineSTPT_17=686687.500000, 1264865.375000, 0.000000
lineSTPT_18=688006.750000, 1001153.500000, 0.000000
lineSTPT_19=897500.750000, 999728.375000, 0.000000
lineSTPT_20=899638.500000, 1303280.875000, 0.000000
lineSTPT_21=788478.500000, 1260527.000000, 0.000000
lineSTPT_22=0.000000, 0.000000, 0.000000
lineSTPT_23=0.000000, 0.000000, 0.000000
Let us know how this goes for you please!