@Skorp said in TUSBA calibration:

@Alfred

“Pairing
The process of adjust and calibration of throttle with TUSBA starts with the Pairing action. With this action TUSBA adjusts individually the amplifiers of each analog axis to obtain the maximum span and so to make better use of 12 bits analog converter. For this, TUSBA needs to know the maximum and minimum values of the analog measure of each axis, so as we will see after, we will need to move the axes to the extreme positions to achieve these values.”

When I have a problem always made Pairing and calibration.

you mean the square that says “pairing…” on the TUSBA tab in RS_HID__DEV _TOOL? yeah I did that already more than once

@Tazz You CH Propedals is rewired to Cougar view the 2 more axis from Toe Brakes?!

CH Propedals Rewire

I have the same problem with you, i rewire my CH Propedals and add two more axis to CCP and have full axis there, but the widows dont see toe breaks.

Have some way to add two more axis two BMS see?

@Doc0301
Check in the Controller Setup .
Maybe the HMCS Knob ist assigned to an Axis, if so , the Knob cannot be manipulated in 3dPit

@Viper Thank your for this useful advice!

@justonce01 said in Keyfile for TUSBA + Warthog Joystick:

@Flow32 said in Keyfile for TUSBA + Warthog Joystick:

Why not use the excel file provided with BMS to generate a clean keyfile ? It is an amazing tool 🙂

Is that file still being kept up-to-date with the latest callbacks and such?

Yes

I’d recommend converting your setup to DX too. The alternative launcher really makes the transition very easy (esp. if all you’re using for BMS at the moment is a HOTAS), and even if you “program” the cougar using nothing but a text editor to create your keyfile it’s not too hard, either (thanks to the excellent technical manual provided with BMS).

Cheers, Uwe

@huffer2 , thanks for the advice. Will give it a shot

@SgtT11B-0 I sent you chat

@Icarus can you guide me?
Tx

@JUmpstart5179 copy that. thanks 🙂

@Tomcattwo
I want to thanks tomcattwo also.
I finally have a working radar cursor on the TQS.

Problem solved using Vista 64 bit drivers 2007 HCO from TM support driver download to install Cougar in W11

The stick is sweet apart from a small challenge with Throttle microstick.

It seems to detect the Cursor X as a 0-64000 range (like a rotary) rather than stay at halfway and move cursor L and R from centre position. Testing jet shows I t constantly drives TDC to LHS of RADAR display in MFD.

I will start another thread with a small video tomorrow. Any help gratefully received.

Cheers,
Zap

@Alfred Thanks that is what I finally did and it works fine. I also got smart enough to turn off the cougar control panel emulation, was getting dx conflicts.

@djpich Are you sure you didn’t mix them up, they come in 3 sets , X Y Z - throttle if have.
They (vipergear) explained that they shouldn’t be mixed… eg. put magnet for X and hal sensor for Y.
Might be the case… , in newer revisions they had colored plastic cases… mine didn’t (older rev) but they came every set in separate plastic bag…

Can’t hurt…

@airtex2019 - another diff between the Hornet and Harrier sticks is that the Trim and Castle switch locations are swapped between the two…so if you want to make a semi-realistic Harrier grip out of the TM Hornet one, just swap those two switch locations!

Other than that they are the same grip.

HOW

win 10 pro my hotas connect, green light fot emulation, no button or axis exist for windows…

Also, I just realized you can use the launch without setup override. I did not see that option and it appears many did not.

@DuxRus Hello pilot, a pleasure to have you back, never better said before, you return in a wonderful moment in this community.

I recommend that you use the wonderful tool of our dear @chihirobelmo , who without a doubt if the Olympus BMS exists, has earned a place near the DEVs.

https://github.com/chihirobelmo/FalconBMS-Alternative-Launcher/releases/download/v2.1.3/Falcon_BMS_Alternative_Launcher_Setup_v2.1.3.msi