New update.

Orehova Vas TCN station was misplaced over Slovenj (nearby).
Maps updated in the first post.
Date of last update written in the first post.

Thanks! Interesting, this is a higher level editor, but I will try.
Regards,
Attila

Well , it could be that DU munitions caused meltdown of snow from nearby mountain(s) Bjelašnica/Jahorina , you know, olympic games '84 ….

lololo … I better get some sleep, b4 I’m accused for trolling :mrgreen:

Nope, re-install won’t do a zilch with this… Something is really bugged in that CAM save of yours,.

Something with the landing or even takeoff , but I cannot tell who or what exactly from crashlog. - it doesn’t say is it your plane or some AI …

MAYBE… (and that’s a big maybe) it would help what were you doing and where you were at the time , before the crash …

Sometimes , very rare but, stuff like that happens , campaign gets in bugged state, and only way out is load save before or find out bugged unit and try to abort that flight or delete it completely with the Mission Commander… or just skip the time until that unit’s flight is over., package deleted from ATO list.

Sorry can’t be more of a help …

@cougar56th:

What airbase? And campaign?

Hi, Cougar56th

It’s about Brnic Airbase

Also look at Taxi Charlie to runway 12, two Sam batteries on each side of taxi almost on it : to pass between them cause aircraft explosion. It’s the night picture.
Except for AI of course which can roll between them an through the ground vehicles on runway.Those things were noticed in Balkans 4.34_U2 and Balkans 4.34_U2.1. The problem is not day dependent as those objects are statics, you can see in the bottom right of these pictures the date, they are differents . A curious phenomen near airbase Slovenj Gradec happened : that’s like the fog inside the cockpit, the last picture shows the RWR and MFD’s but it concern also other instrument as the pilot fault list for exemple : there is a modification about their representation, don’t know why!

Now an other big problem : the moving ground vehicles on airbases (tanks …), it’s certainely plaisant to see but I notice 2 times at Aviano airbase with a campain mission by ATO, near the taxi Tango Bravo a tank’s column rolling in my direction and explode my craft. It occur also near the runway 23, I have had just the time to enter into the runway of course without permission from the tower to avoid collision. I experienced the same things at Brnic Airbase near the Taxi Charlie Whisky before to go to Runway 12, but this time with a personal mission I created inside the campain.

Conclusion : If these problem occur with ATO mission or Personal mission, the theater need some code to detect any aircraft position on the ground to make rolling ground vehicles (tanks and others) far enough from these aircrafts. Or It need to suppress moving ground vehicles (tanks …) in the airbases

Ah! the campain is Balance of Power

@cougar56th:

Hey white_fang….

do you mind if I add this to a hotfix?

No any prob, friend. It’s not mine anyway, I’ve just corrected old values from 4.33 , 4.34…

Hey guys,

With the release of 4.34 Update 2, here is the update for the Balkans theater as well. The Balkans Dev Team has updated the Balkans theater to be compatible with Update 2. Make sure you read through the changelog to see any new goodies/updates/fixes.

Here is the link to follow to download it.

https://www.benchmarksims.org/forum/showthread.php?35535-Balkans-Theater-for-Falcon-BMS-4-34

Happy Flying

Cougar

@Killroy:

I would have preferred this could had been implemented with a check box in Setup, so the user could choose between “barrier” between the 2 and 3 D world, and opportunity to continue to fly with his mates in another plane (in sted of watching the map for perhaps a long time). But the best is, it is not too late to implement 🙂 We have of course also experienced server failures, therefore we usually all participants take a complete restart after 2-3 missions. AND : Deep respect to all of You who makes this simulator better and better !

Do you understand that this is mandatory to restart BMS after a mission in 3D especially for the server ? It is not a question of choice or preference,

Actually the host should always stay in 3D , so after being shot down , your host shall never be back to 2D/UI (that reminds me that we should prevent that as well !!!)

As we know players are unable to respect simple rules . We chose to impose it 🙂

@Mav-jp:

it’s always recommanded to play BMS before lunch anyway 🙂

…

@Alfred:

don’t know if this is a common or known bug, but after I land with the wingman and the element and decide to start another sortie from the same airbase I noticed that the element hasn’t landed yet in the new sortie! although I don’t exit the game unless I make sure all the flight members have landed already. Not only that but the element always crashed before he lands. When I placed the camera on him I saw a jet with a pilot that ejected! why is this happening more than once and is it fixable?

Try aborting the package or the flight after landing.

Hi,

I’m trying to add the default Blk 50 148th and (Blk42?) 157th “Have Glass” skins to my Balkans TO. I’m not very well versed in modding BMS, especially if LE is involved (although I’m not sure if I need to make changes to any of the default LODs?) Anyone able to point me in the right direction?

Hello, can anyone point me to or provide a quick link to the correct working version for Balkans theater for 4.33 update 5? I had 4.33 installed and working for some time but only had the Korea theater. I have been away from BMS for awhile and now upon returning it is at 4.34. I DL’d 4.34 and installed andthen downloaded the 4.34 Balkans theater and installed. The installs seem to have gone ok, but I was using Ice’s Helios touchscreen profile and YAME64 etc, with the 4.33 setup I had and it was a lonnng learning curve to finally get that all running correctly! Now with 4.34 none of that works and must all be reinstalled/reconfigured etc and I don’t remember half of all the stuff i had to do the first time with 4.33, and I think I read something about YAME not being totally compatible with 4.34 either…ugh. I know eventually I will have to relearn all that lost knowledge of the Helios and Yame stuff in order to fully utilize BMS 4.34, but in the meantime, since my 4.33 setup is working great with the touchscreen etc, all I really want to do is have a functioning Balkans theater for 4.33 for now.

So… where can I find a good 4.33 u5 Balkans download? Thanks for any help!

Hello

I have a problem on the 3 campaigns or there is a cinematic. Cinematiques does not launch except for one campaign. The cinemas are also launched without worry on the theater of korea. Can you help me? Thank you in advance.

@Gunhog80:

Hi,

i have used the Keystroke file from Falcon4.33, and load it into 4.34.
I check my settings later…thanks for the advise.

Cheers

COME ON !!! why not using the falcon Allied force one ?

I forgot, about fuel tanks lod I replaced the models I had too, as the main plane model, just replaced the originals, tip tanks 104 created by Radium, and the original 104 main model, in db since years.

Regards

…heh…I had to explain to a USN pilot that was off flying Vipers a bit ago that there is a way to get the tapes (and the DED) OFF the HUD and how to do it. Personally, I never put the DED on the HUD either…there isn’t one in any USN aircraft that I know of.

I know where the problem come from : Team relation should be porked in the Balkans Instant.cam file. Just setup the exactly same team relation than in KTO (instant.cam file)

well, the fact about diverted flights if a carrier has been destroyed or airbases in general should be cool if flights are already airborne. About carrier squadron reallocation waiting for devs work.

Hello!
I just finished a campaign, took over everything I had to and after seeing the “Fry forces surrender to NATO” message, I checked my logbook and and saw that the stalemate number went up instead of the won or lost one…

Is it a bug?

Campaign file: http://www.mediafire.com/file/nl8snfc9efnnol1/balkans91.cam/file

thanks